Filter
Top Products
24
WEB-BASED BROWSER MANAGEMENT
the switch detects another bridge connected to this port, the manual setting for
Edge Port will be overridden and the port will instead function as a point-to-point
(P2P) connection.
P2P Port: Shows if this port is functioning as a point-to-point connection to exactly
one other bridge. The switch can automatically determine if the interface is
attached to a point-to-point link or to shared media. If shared media is detected,
the switch will assume that it is connected to two or more bridges.
Protocol: Shows the Spanning Tree Protocol functioning on this port, either RSTP
or STP (that is, STP-compatible mode).
IGMP Status
These screen shows the IGMP Snooping statistics for the whole switch.
VLAN ID: VLAN ID number.
Querier: Shows whether Querying is enabled.
Queries transmitted: Shows the number of transmitted Query packets.
Queries received: Shows the number of received Query packets.
v1 Reports: Shows the number of received v1 Report packets.
v2 Reports: Shows the number of received v2 Report packets.
v3 Reports: Shows the number of received v2 Report packets.
Leaves: Shows the number of Leave packets received.
VeriPHY
These screens allow you to perform cable diagnostics for all ports or just selected
ports (using the drop-down menu) to identify any cable faults (shorts, opens, etc.).