Filter
Top Products
27
SPECIFICATIONS
SPECIFICATIONS
Standards
• IEEE 802.1d (Spanning Tree Protocol)
• IEEE 802.1p (Trafc Prioritization)
• IEEE 802.1q (VLAN Tagging)
• IEEE 802.1w (Rapid Spanning Tree
Protocol)
• IEEE 802.3ad (Link Aggregation)
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3ab (Twisted Pair Gigabit
Ethernet)
• IEEE 802.3ad (Link Aggregation
Control Protocol LACP)
• IEEE 802.3af (Power over Ethernet
802.3at Type 1)
• IEEE 802.3at (Power over Ethernet
802.3at Type 2)
• IEEE 802.3u (100Base-TX Fast
Ethernet)
• IEEE 802.3x (ow control, for full
duplex mode)
General
• Media support:
- 10Base-T Cat3, 4, 5 UTP/STP RJ45
- 100Base-TX Cat5 UTP/STP RJ45
- 1000Base-T Cat5e UTP/STP RJ45
• Packet lter/forwarding rate:
- 1,488,000 pps (1000 Mbps)
- 148,800 pps (100 Mbps)
- 14,880 pps (10 Mbps)
• MAC address table: 8192 entries
• Backplane speed: 16 Gbps
• Switch architecture: store and forward
• Conguration Options:
- Port link speed: 10 Mbps, 100 Mbps,
1000 Mbps or auto-negotiation
- PoE on/off per port
- Flow control on/off per port
- VLAN
- Port Mirroring
- Port Aggregation/LACP: 4 groups
with up to 8 member ports per trunk
- Broadcast Storm conguration with
broadcast rate, multicast rate and
ooded unicast rate
- IGMP Snooping
- Quality of Service (QoS): 802.1p or
DSCP
- Integrated VeriPHY cable diagnostics
tool
- Integrated ICMP Ping client sends
ping requests to other network nodes
- SNMPv1/v2c (Simple Network
Management Protocol)
- LAN settings (IP address, DHCP,
Gateway, etc.)
• Monitoring Options:
- Trafc statistics
- LACP status
- RSTP status
- IGMP status
• Certications: FCC Class A, CE
LEDs
• PoE, Power, Link/activity
Power
• Input: 100 – 240 V AC, 50 – 60 Hz
• Power consumption: 130 Watts (max.)
Environmental
• Metal housing
• Dimensions: 266 (w) x 160 (l) x 44 (h)
mm (10.5 x 6.3 x 1.7 in.)
• Weight: 1.6 kg (3.5 lbs.)
• Operating temperature: 0 – 45°C
(32 – 113°F)
• Operating humidity: 10 – 90% RH,
non-condensing
• Storage temperature: -20 – 90°C
(-4 – 194°F)