Filter
Top Products
26
WEB-BASED BROWSER MANAGEMENT
Reboot
Click Yes to restart the switch. The reset is complete when the Power LED stops
blinking.
Factory Default
This function is to force the switch back to the original factory settings. To reset the
switch, select Reset to Factory Defaults from the drop-down list and click Apply.
The LAN IP Address, Subnet Mask and Gateway IP Address will be reset to their
factory settings.
Software Upload
Select Upgrade Firmware from the Tools drop-down list, click Browse to select
the rmware le, then click Upload.
Conguration File Transfer
This allows you to save the switch’s current conguration or restore a previously
saved conguration back to the device. Conguration les can be saved to any lo-
cation on the Web management station. Click Browse to nd a conguration le,
then click Upload to save it or Download to restore it.
Logout
The administrator has write access for all parameters governing the onboard agent,
so you should assign a new administrator password as soon as possible and store
it in a safe place.