Filter
Top Products
DTP T EU 332, DTP T EU 232, DTP T MK 332, and DTP T MK 232 • Installation and Operation 5
108.80 mm
(4.28")
Top
80.50 mm
(3.17")
151.50 mm
(5.97")
Front
13.50 mm
(0.53")
29.4 mm
(1.16")
48.8 mm
(1.92")
Side
HDMI IN
PWR HDCP HDMI VGA AUTO
VGA IN
DTP T EU 232
AUDIO IN AUDIO IN
DTP
HDBT
RESET
CONFIG
Figure 2. DTP T EU 332 and DTP T EU 232 Dimensions
Choose a location that allows cable runs without interference.
NOTE: Cables may need to be installed in the wall or conduits before installation.
Install the junction box or European cable channel system (see Installing the Junction
Box or European Cable Channel System on page 6).
NOTE: Refer to the manufacturer for more junction box installation requirements.
Route and connect cables to the rear panel connectors (see Rear Panel and Side
Panel Features on page 7).
Mount the unit into the junction box (see Mounting the Switching Transmitters on
page 9).
Connect inputs to the front panel connectors (see Front Panel Connectors on
page 10).