Filter
Top Products
DTP T EU 332, DTP T EU 232, DTP T MK 332, and DTP T MK 232 • Installation and Operation 10
2. Using the four short screws, attach the transmitter to the flanged edges of the mounting
plate (see figure 6).
W
all Box
Mounting
Plate
HDMI IN
PWRHDCPHDMI VGA AUTO
VGA IN
AUDIO IN AUDIO IN
DTP T EU 232
Figure 6. Transmitter Installation (EU Unit Shown)
Front Panel Connectors
HDMI IN
PWR HDCP HDMI VGA AUTO
VGA IN
DTP T EU 332
AUDIO IN AUDIO IN
BC CA
Figure 7. Front Panel Connectors (DTP T EU 322 Shown)
A
HDMI input port (see below)
C
Audio In connectors (see page 11)
B
Analog video input port (see below)
NOTE: All transmitter models in this guide have a similar front panel appearance.
A
HDMI input port — Connect a digital video source into the switching
transmitter via this HDMI connector. It can accept HDMI, DVI (with an
appropriate adapter), or dual mode DisplayPort video sources.
NOTES:
• The maximum HDMI cable length is 4.5 m (15 feet).
• Use an Extron LockIt lacing bracket to secure the HDMI connector to the
device (see HDMI Connection on page 12).
B
Analog video input port — Connect an analog video source (RGB
and component) video source into the switching transmitter via this
15-pin HD connector. See VGA connector Wiring on page 13 to for
connector pinout.