Filter
Top Products
DTP T EU 332, DTP T EU 232, DTP T MK 332, and DTP T MK 232 • Introduction 3
Features
Transmits HDMI or analog video, control, and analog audio up to 330 feet (100 meters)
(DTP T EU 332 or DTP T MK 332) or 230 feet (70 meters) (DTP T EU 232 or DTP T MK 232)
over a single STP cable — The units provides high reliability and maximum performance
on an economical and easily installed cable infrastructure.
Supports computer video to 1920x1200, including HDTV 1080p/60 Deep Color and 2K
Accepts additional analog stereo audio signals — The DTP transmitters support
a direct pass through connection for stereo analog audio signals for simultaneous
transmission over the same single twisted pair cable. Analog audio is not embedded
onto the digital video signal. A DTP 330 or DTP 230 receiver can output balanced and
unbalanced audio, allowing streamlined integration within an AV system.
The DTP output is compatible with HDBaseT-enabled devices — The DTP output can
be configured to send video and embedded audio, plus bidirectional RS-232 and IR signals
to HDBaseT-enabled displays.
Bidirectional RS-232 and IR insertion for AV device control — Control and IR signals
can be transmitted alongside the video signal over DTP connections, allowing the remote
device to be controlled without the need for additional cabling. Bidirectional control insertion
eliminates the need for control system wiring to remote devices.
Remote powering of transmitter or receiver — For simplified installation, only one
power supply is necessary to power both devices.
Digital conversion of analog input signals — Analog signals are digitized, ensuring that
a reliable, high quality digital video signal is sent to the output destination.
EDID Minder — Automatically manages EDID communication between connected devices,
ensuring that all sources power up properly and reliably output content for display.
Compatible with all DTP HDMI 330 (230) and DTP DVI 330 (230) receivers, and
DTP 330- (230-)enabled products — The switching transmitters can be used with the
Extron IN1608, DTP CrossPoint 84, and other DTP 330- (230-)enabled products to meet
application requirements.