Filter
Top Products
Command and Response Table for SIS Commands (continued)
DTP T EU 332, DTP T EU 232, DTP T MK 332, and DTP T MK 232 • Remote Control 24
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Video mute
Mute video
1B
Vmt1
]
Output no video signal.
Unmute video
0B
Vmt0
]
Output the selected video input.
Read video mute
B
X$]
Mute status =
X$
.
Analog audio mute
Mute analog audio
1Z
Amt1
]
Output no analog audio signal.
Unmute analog audio
0Z
Amt0
]
Output analog audio input.
Read analog audio mute
Z
X$]
Analog audio mute status =
X$
.
Disable (Mute) HDMI Output Embedded Audio
Enable HDMI audio output
E
1AFMT
}
Afmt1
]
Enable HDMI audio. (Default)
Disable HDMI audio output
E
0AFMT
}
Afmt0
]
Disable HDMI audio.
View HDMI audio configuration
E
AFMT
} X$]
Pixel phase (RGB input only)
Set pixel phase
E
2*
X1#
PHAS
}
Phas2*
X1#]
Increment pixel phase
E
2+PHAS
}
Phas2*
X1#]
Decrement pixel phase
E
2–PHAS
}
Phas2*
X1#]
View pixel phase value
E
2PHAS
} X1#]
Total pixels
Set total pixels value
E
2*
X1$
TPIX
}
Tpix2*
X1$]
Increment total pixels
E
2+TPIX
}
Tpix2*
X1$]
Decrement total pixels
E
2–TPIX
}
Tpix2*
X1$]
View total pixels
E
2TPIX
} X1$]
NOTE:
X$
= Status 0 = Not detected, authorized 1 = Detected, authorized
X1#
= Pixel phase 00 – 63 (32 = default)
X1$
= Total pixels Depends on input rate