Filter
Top Products
Command and Response Tables for SIS Commands
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Input Switching
Input selection
NOTE: The FOX T USW 103 saves the last input selection when cycling power.
Set video input selection
X1!! InX1!
•
All] Select input X1!.
View video input selection
!
X1!]
View currently selected
source.
Auto switch mode
Disable auto switch mode
E0AUSW} Ausw0]
Switch inputs manually
(default).
Set priority to the highest
active input
E1AUSW} Ausw1]
Gives priority to the highest
numbered active input.
Set priority to the lowest
active input
E2AUSW} Ausw2]
Gives priority to the lowest
numbered active input.
View the auto switch mode
EAUSW} X1@]
View the auto switch mode.
Audio Configuration
Audio gain and attenuation
NOTE: Gain and attenuation are case-sensitive.
Set gain
X&G AudX(] Set gain to X(.
Set attenuation
X*g AudX(] Set attenuation to X(.
Increment audio level
+G or +g
Aud
X(]
Increase the gain or
attenuation.
Decrement audio level
-G or -g
Aud
X(]
Decrease the gain or
attenuation.
View audio level
G or g
X(]
View the audio level.
Input audio selection
Set audio input format
EIX1!*X2%AFMT} AfmtIX1!*X2%] Set input X1! to X2% audio
format.
View audio input format
EIX1!AFMT} X2%]
View the audio iput format.
NOTE: X& = Audio gain 0 to 10 (0 = default)
X* = Audio attenuation –18 to 0
X( = Audio level –18 to 10
X1! = Input selection 1 = VGA (input 1)
2 = HDMI (input 2)
3 = HDMI (input 3)
X1@ = Auto switch mode 0 = manual switching (default)
1 = priority given to the highest numbered active input
2 = priority given to the lowest numbered active input
X2% = Audio input format 0 = auto (default)
1 = digital embedded
2 = analog
FOX T USW 103 Universal Switcher • Remote Control 15