Filter
Top Products
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Advanced Configurations
Input sync detection
View input sync detection
E1LS} xxx.x,xxx.x]
Shows horizontal frequency in
kHz and vertical frequency in
Hz. Returns 000.0,000.0 if no
signal is detected.
Input video format (VGA only)
Set input video format
1*X1%\ Typ1*X1%] Sets input 1 to format X1%.
View input video format
1\
X1%]
View video format of input 1.
Front panel lockout
Set front panel executive
mode
X%X ExeX%]
Enable or disable (default) the
front panel lockout (executive)
mode.
View front panel executive
mode
X
X%]
View the front panel lockout
(executive) mode.
Plus mode transmission
Disable Plus mode
transmission
81*0#
Plus0
]
Disable Plus mode
transmission.
Enable Plus mode
transmission
81*1#
Plus1
]
Enable Plus mode transmission
(default).
View Plus mode transmission
81#
X%]
View Plus mode transmission
setting.
HDCP authorized device (HDMI inputs only)
HDCP authorized device On
EEX1!*1HDCP} HdcpEX1!*1]
HDCP authorized device on for
input X1! (default).
HDCP authorized device Off
EEX1!*0HDCP} HdcpEX1!*0]
HDCP authorization off for input
X1!.
Query HDCP authorized
device status
EEX1!HDCP} X^]
View the HDCP authorization
status.
HDCP status (HDMI inputs only)
Query HDCP status
EIX1!HDCP} X1#]
View the HDCP status.
NOTE: X% = Enable or disable 0 = off or not detected
1 = on or detected
X^ = HDCP authorization 0 = HDCP authorization off
1 = HDCP authorization on (default)
X1! = Input selection 1 = VGA (input 1)
2 = HDMI (input 2)
3 = HDMI (input 3)
X1# = HDCP status (HDMI only) 0 = no source device detected
1 = source detected with HDCP
2 = source detected but no HDCP is present
X1% = Input video format 0 = auto detect (default)
1 = RGB
2 = YUV
FOX T USW 103 Universal Switcher • Remote Control 17