Extron electronic IPL 250 Switch User Manual


  Open as PDF
of 20
 
2-7
Refer also to the IPL 250 Reference Manual at www.extron.com.
IPL 250 • Setup
YoucanreconnectusingeitherTelnetoraWebbrowsertoverifythatthe
updatewassuccessful.
6. AfterverifyingthattheIPaddresschangewassuccessful,enterandissuethe
“arp–d”commandattheDOSprompt.Forexample:
arp –d 10.13.197.7removes10.13.197.7fromtheARPtable
or
arp –d*removesallstaticIPaddressesfromtheARPtable.
Configuring the IPL 250 with Global Configurator
AfteryouinstalltheGlobalCongurator(GC)
softwareonthePCandhavedownload
devicedrivers,dothefollowing:
• createaGCprojectle
• conguretheIPL250andotherIPLdevices
• launchtheGlobalViewer
®
interface
• testthecongurationandthesystem
The Global Configurator Helpleincludes
anintroductiontothesoftware
("Introduction")andasection("Getting
Started")onhowtostartaGlobal
Conguratorproject.Italsofeaturesstep-by-
stepinstructionsonthebasictasksinvolved
inconguringanIPL250.
Anexampleofthetopicsavailableinthe
GChelpleisshownatright.Sections
recommendedforyourreadingareindicated
byboxesinthegureatright.
Ifyouhavequestionsduringinstallation
andsetup,youcancalltheExtronS3Sales&
TechnicalSupportHotline or the ExtronS3
ControlSystemsSupportHotline.
 previous next