Filter
Top Products
• Subnet mask: The subnet mask is used to split IP networks into a series of subgroups
(subnets). The mask is a binary pattern that is matched up with the IP address to turn
part of the host ID address field into a field for subnets. You can enter a new subnet
mask address using the same format that is used for the IP Address.
Date and time settings
The following settings are available in the Date/Time Settings section.
NOTE: This section lets you set the date and time on your PCS4 unit. However,
the passage of time is not reected in the Date and Time elds on the web
page. The screen continues to display the settings you entered and does not
increment them as time passes. However, the PCS4 itself continues to keep
the correct time internally, enabling you to schedule power on and off for
the receptacles.
• Date: Select month, day, and year from the pull-down menus.
• Time: Select hours, minutes, and AM or PM from the pull-down menus.
• Zone: From the pull-down menu, select the time zone for the PCS4 location (number of
hours offset from Greenwich mean time).
• Daylight Savings: Daylight savings time (DST) is a one-hour offset that is observed in
some countries. You can select a radio button to set the PCS4 for daylight savings time
for the US, Europe, or Brazil; or select Off to disable it.
The following daylight savings periods are observed:
• US — Starts the second Sunday in March and ends the first Sunday in November.
• Europe — Starts the last Sunday in March and ends the last Sunday in October.
• Brazil — Starts the third Sunday in October and ends the third Sunday in February.
(Equatorial Brazil does not observe DST.)
3. When you have made all the desired changes in one section, click the Submit button at
the bottom of the section. The new IP settings are displayed at the right of the fields in
which you entered them. The new date and time settings are displayed in the fields in
which you entered or selected them.
4. Follow steps 2 and 3 to make changes in the other section, if desired.
Clicking Cancel in either section restores the previous settings, if the values you entered
have not been submitted.
IPL T PCS4 • HTML Configuration and Control 24