Extron electronic MPS 112CS Switch User Manual


 
Programmer’s Guide, cont’d
MPS Series • Programmer’s Guide5-6
PRELIMINARY
Special functions
Switcher mode select
Select switcher mode
X7
*1# Mod
X7
X7
= switcher mode:
1 = Single mode (default).
2 = Separate switcher mode.
View switcher mode 1 #
X7
Mic talk-over threshold
Display talk-over threshold
X8
*2 # Thr
X8
Shows the mic threshold
number.
X8
= 0 through 15,
default = 8.
Decrement threshold -*2# Thr
X8
Decremenst mic threshold one
step.
Increment threshold +*2# Thr
X8
Increments mic threshold one
step.
View mic talk threshold 2 #
X8
2 = talk-over threshold
X8
= Value range: 0 - 15 (8 = midrange = default)
+ = increment 1
- = decrement 1
Follow sub mode*
Turn the follow sub mode on/off
X3
*4# Fsm
X3
X3
: 0 = off, 1 = on
View the follow sub mode status 4# Fsm
X3
X3
: 0 = off, 1 = on
Mic (phantom) power*
Turn mic power on/off
X3
*57# Mfp
X3
X3
: 0 = off, 1 = on
View mic power status 57# Mfp
X3
X3
: 0 = off, 1 = on
Program audio ducking level in talk over mode*
Adjust audio ducking level
X12
*58# Adl
X12
Adjusts how much
(
X12
= 0 to 30 dB) the program
audio ducks (automatically
decreases) while the MPS is in
talk over mode.
0 = audio ducking is off.
Increment audio ducking +*58# Adl
X12
Decrement audio ducking -*58# Adl
X12
View audio ducking level 58# Adl
X12
Program audio breakaway*
Switch program audio
X1
*
X2
$ Pra
X1
*
X2
Selects any input from any
group to be routed to the
program audio output.
X1
= group 1 through 3
(1 = VGA, 2 = S-video,
3 = composite video).
X2
= inputs 0 through 4 for each
group (input 0 = off).
This command works only in Separate mode with Follow sub-mode turned off. If Follow sub-mode is turned on or if
the switcher is in Single Switcher mode, the program audio breakaway command does not work, and the response is
an E10 error code.
* These groups of commands are new for units using firmware version 1.10 or higher. Earlier firmware
versions do not support these four command groups.
Command ASCII Command Response Description
(host to switcher) (switcher to host)
Switcher-
initiated
messages
X
X
X
X
X