Extron electronic MPX Plus 866 A Switch User Manual


  Open as PDF
of 23
 
Refer also to the MPX Plus 866 A User’s Manual at www.extron.com.
Refer also to the MPX Plus 866 A User’s Manual at www.extron.com.
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Audio output volume
Set the audio volume to a specic
value
X@
*
X(
V Out
X@
•Vol
X(]
Example:
1*50v
Out01•Vol50
]
Set output 1 volume to 79%.
Increment volume
X@
+V Out
X@
•Vol
X(]
Increase volume by 1 step.
Example:
1+V
Out01•Vol51
]
Decrement volume
X@
-V Out
X@
•Vol
X(]
Decrease volume by 1 step.
Read output volume
X@
V
X(]
Save and recall presets
N
Presets saved from the front panel are always global ties presets, which are complete, ties only, configurations that overwrite all ties in the
current configuration when recalled).
Presets recalled using any operator interface can be either global ties presets or partial presets.. Partial presets are created in the DSP
Configurator program, and can include audio parameters set in the DSP and only selected ties. When recalled, partial presets overwrite only
those portions of the current configuration that are part of the preset.
N
If you try to recall a preset that has not been not saved, the matrix switcher responds with the error code E11.
Save the current conguration as a
global ties preset
X1)
,
Spr
X1)]
Command character is a comma.
Example:
9
,
Spr09
]
Save current ties as preset 9.
Recall a global ties or partial preset
X1)
.
Rpr
X1)]
Command character is a period.
Example:
5
.
Rpr05
]
Recall preset 5, which overwrites all
(global ties preset) or some (partial preset)
of the current conguration.
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Front panel lock (executive mode)
Lock all front panel functions 1X
Exe1
]
Enable Lock mode 1.
Lock advanced front panel functions 2X
Exe2
]
Enable Lock mode 2.
Unlock all front panel functions 0X
Exe0
]
Enable Lock mode 0.
View lock status X
X1!]
Information requests
Information request I
V14X12•A14X12
]
V14X12 is the video matrix size.
A14X12 is the audio matrix size.
Request part number N
60-796-01
]
Query controller rmware version Q
X1@]
Example:
Q
1.23
]
The factory-installed controller rmware
version is 1.23 (sample value only).
N
X@
= Output
number
01 – 06
X(
= Volume adjustment range 00 – 64 (1 dB/step except for 0-to-1, which is 22 dB) (default = 64 [0 dB])
X1)
= Global ties preset or partial preset # 00 - 32
N
X1!
= Lock mode 0, 1, or 2
X1@
= Firmware version number to second decimal place (x.xx)
MPX Plus 866 A • Remote Control
Remote Control, cont’d
4-8
MPX Plus 866 A • Remote Control
4-9
 previous next