Extron electronic MTPX PLUS 3216 Switch User Manual


 
Refer also to the MTPX Plus User’s Manual at www.extron.com.
Refer also to the MTPX Plus User’s Manual at www.extron.com.
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Create ties
N
• Commands can be entered back-to-back in a string, with no spaces; for example; 1*1!02*02&003*003%4*24$.
The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%).
N
The & tie command for RGB and the % tie command for video can be used interchangeably.
N
The & read tie command for RGB and the % read tie command for video can be used interchangeably.
Tie input
to output video and
audio
X!
*
X@
! Out
X@
In
X!
All
]
Tie the video and audio from input
X!
to
output
X@
.
Example:
1*3!
Out03
In01
All
]
Tie input 1 video and audio to output 3.
Tie input
to output, RGBHV video
only
X!
*
X@
& Out
X@
In
X!
RGB
]
Audio breakaway.
Example
(see second Note, above):
10*4&
Out04
In10
RGB
]
Tie input 10 RGB to output 4.
Tie input
to output, video only
X!
*
X@
% Out
X@
In
X!
Vid
]
Audio breakaway.
Example
(see 2nd Note, above)
7*5%
Out05
In07
Vid
]
Tie input 7 video to output 5.
Tie input
to output, audio only
X!
*
X@
$ Out
X@
In
X!
Aud
]
Audio breakaway.
Example:
24*04$
Out04
In24
Aud
]
Tie input 24 audio to output 4.
Read RGB output tie
X@
&
X!]
RGBHV input
X!
is tied to output
X@
.
Read video output tie
X@
%
X!]
Video input
X!
is tied to output
X@
.
Read audio output tie
X@
$
X!]
Audio input
X!
is tied to output
X@
.
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Audio/RS-232 TP input (wire pair 3 and 6) configuration
N
The RS-232 output insert ports, when enabled (
EX$
*0Lrpt
}
), override the audio/RS-232 TP input configurations.
Configure input as audio
X!
*0\ Typ
X!
*0
]
Define the audio/RS-232 input as audio,
such as provided by an MTP 15HD A
transmitter.
Configure input as RS-232
X!
*1\ Typ
X!
*1
]
Define the audio/RS-232 input as
bidirectional serial communications,
such as provided by an MTP 15HD RS
transmitter.
Read TP input configuration
X!
\
X#]
Show the audio/RS-232 wire pair input
definition.
RS-232 output inserts enables
Disable an RS-232 output insert
port
EX$
*0Lrpt
}
Lrpt
X$
*0
]
Disable the RS-232 insert on the
X$
output.
Enable an RS-232 output insert port
EX$
*1Lrpt
}
Lrpt
X$
*1
]
Enable the RS-232 insert on the
X$
output.
Read RS-232 output insert status
EX$
Lrpt
} X%]
Show the status of the RS-232 output
insert.
N
X!
= Input number
00 – (maximum number of inputs for your model) (00 = untied)
X@
= Output number 01 – (maximum number of outputs for your model)
N
X!
= Input number
01 – (maximum number of inputs for your model)
X#
= Audio/RS-232 wire pair input type 0 = audio
1 = RS-232
X$
= RS-232 output insert port MTPX Plus 168, 816, 1616 01 – 08
MTPX Plus 1632, 3216, 3232 01 – 16
X%
= RS-232 output insert status 0 = disabled
1 = enabled
Command/response table for selected SIS commands
MTPX Plus Series • Remote Control and Optimizing the Video
Remote Control and Optimizing the Video, cont’d
4-4
MTPX Plus Series • Remote Control and Optimizing the Video
4-5