Filter
Top Products
Remote Operation, cont’d
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Remote Operation4-20
Master-Reset selection — Master-Reset clears all ties and presets, clears all video
and audio mutes, sets all input audio gain to unity gain (+0 dB), and sets all
output levels to the factory default (professional level, +4 dBu).
Using Emulation mode
Emulation mode allows you to set up the software without attaching the switcher
to the computer. To use Emulation mode, do the following:
1. Double-click on the Matrix Switchers+ Control Program icon in the Extron
Electronics group or folder.
2. Choose Emulate, and click OK.
3. Choose an emulation file to open, and click OK. The file DEMO.MTX
provides a sample of a completed matrix setup. The file NEW.INI provides a
blank setup to get you started.
4. Enter the file name under which you want to save any changes to the file, and
click OK.
5. Select “1, 2, or 3” as the number of video boards, “1 or 2” as the number of
audio boards, and “MVX Series” as the matrix model for which you are
preparing a configuration; and click OK (figure 4-15).
Figure 4-15 — Emulation mode configuration
6. Continue using the program as described in steps 3 through 7, beginning on
page 4-11.