FARGO electronic 76503 Printer User Manual


 
2
Safety
Precautions
Before operating the
unit, please read the
following safety
precautions carefully.
3
Warnings
CAUTION!
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THE UNIT TO RAIN OR
MOISTURE. TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE SIDE
OR BACK PANELS. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Operate the unit only on 120 VAC, 50 or 60 Hz.
For printers that have been shipped outside of
the United States and Canada, the proper voltage
transformer (100 VAC or 220/250 VAC) and plug
should be furnished with the unit. If you have
any doubt as to whether you have the correct
power transformer and plug for your countryÕs
power supply, DO NOT ATTEMPT TO USE
THE UNIT. Refer to Section 5 of this manual or
contact your dealer or the factory.
Stop operation immediately if any liquid or solid
object should fall into the cabinet. Unplug the
unit and have it checked by qualified service
personnel.
Unplug the unitÕs power transformer from the
wall outlet if you do not use the unit for a long
time. Disconnect the cord by grasping the plug.
Never pull the cord itself.
The unit is not disconnected from the main
power source as long as the power transformer is
plugged into the wall outlet, even if the unit itself
has been turned off.
Do not disassemble the cabinet. Refer servicing
only to qualified personnel.