Filter
Top Products
62
Appendix
B
Interfacing
Information
A. Introduction
The Color ID Card Printer is equipped with a
standard 8-bit Centronics-type parallel data
communications port. This is the means by which
the printer receives data from your computer. No
options for serial data are available. This section
describes the pin assignments, protocol, and signal
specifications for the parallel data input port.
B. Centronics-
type Parallel
Interface
The Centronics-type parallel interface is the most
widely used printer interface due to its simplicity,
speed, and standardization throughout the PC
industry. The printerÕs parallel interface connector
is a standard 36-pin Amp type with two metal-wire
retaining clips and is ECP (Extended Capabilities
Port) compatible. It mates with a standard PC to
printer parallel cable. Try to keep the interface cable
to under 6 feet if possible.
Pin assignments are as follows:
TABLE B-1: Parallel Interface Pin Assignments
14
25
13
PIN 1
36 18
PIN 119
WIRE DIAGRAM
DB36P DB25P
11
22
33
44
55
66
77
88
99
10 10
11 11
12 12
13 13
14 14
32 15
31 16
36 17
19 THROUGH 30 19 THROUGH 25
SHELL SHELL