Filter
Top Products
FS-8700-105_National_Time_and_Signal_FACP Manual Page 6 of 25
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Example
// Client Side Connections
Connections
Port, Protocol, Baud, Parity, NATSfacp_Timeout, NATSfacp_Status_DA
P8, National_Time_Fire, 9600, None, 120s, DA_NATS_STATUS1
1.05 Client Side Node Descriptors
Create one node for each panel connected to the National Time & Signal Network. You can
have multiple nodes on the same port.
Section Title
Nodes
Column Title Function Legal Values
Node_Name Provide name for node Up to 32 alphanumeric characters
Node_ID
This parameter is used to specify
the PANEL number.
1-32
Protocol Specify protocol used
National_Time_FACP,
National_Time_Fire, natsco_facp
Connection
Specify which port the device is
connected to the FieldServer
P1-P8
2
Example
// Client Side Nodes
Nodes
Node_Name, Node_ID, Protocol, Connection
Panel1, 1, National_Time_FACP, P1
Panel2, 2, National_Time_FACP, P1
2
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for
details of the ports available on specific hardware.