Filter
Top Products
FS-8700-112 FCI 7100 Series Driver Manual Page 23 of 24
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Stat Offset Description
#define FCI_7100_STAT_RCVD_BYTES 12
Increments each time a
character is recieved from the
panel. The bytes are only added
when a message terminator is
received. Thus this count is
equiv to the byte count in all
FCI_7100_STAT_RCVD_MSGS
#define
FCI_7100_STAT_PARSED_NO_ERRS_EXCLD_RESET
13
Increments each time a
message is parsed without
errors. Excludes Reset
Messages
#define FCI_7100_STAT_PARSED_NO_ERRS_RESET 14
Increments each time a reset
message is parsed without
errors.
#define FCI_7100_STAT_PARSED_NO_ACTION 15
Increments each time a
message is parsed with no
errors but the nature of the
message doesnt require data to
be stored. (eg empty msg lines)
#define FCI_7100_STAT_PARSED_WITH_ERRS 16
Increments each time a
message produces an error
when parsed.
#define FCI_7100_STAT_INHIBIT_RESET 17
Set to 1 to inhibit resets
altogether
#define FCI_7100_STAT_INHIBIT_RESET_DA_PUT 18
Set to 1 to inhibit resets from
clearing arrays
#define FCI_7100_STAT_INHIBIT_RESET_WHILE 19
Set to 1 to inhibit reset function
from looping thru MD's
#define FCI_7100_STAT_NODE_INFO_MSG 20
Increments each time a
message with node information
is received
#define
FCI_7100_STAT_NO_PLACE_TO_STORE_NODE
21
Increments each time an event
needs to be stored, the event
contains node info and the node
cannot be found so there is no
match and the message was
discarded.