Filter
Top Products
Page 24 of 29FS-8700-66_GE-SNP Manual Page 24 of 29
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: support@fieldServer.com
No
Message Description
38
GE_STAT_DRV_ACT_NO_DATA_R
Corresponds to slave driver actions in
responding to a poll.
There is no data
available.
39
GE_STAT_DRV_ACT_NO_NODE_R
Corresponds to slave driver actions in
responding to a poll. This should never
happen as a connection would ha
ve been
refused.
40
GE_STAT_DRV_ACT_NAK_R
The slave cannot respond to a poll for one
of the reasons above.
41
GE_STAT_DRV_ACT_NORMAL_R
The Server has responded to a poll
normally
42
GE_STAT_CD_UPD_CHECK
A message is inv
alid because the
checksum failed.
43
GE_STAT_CD_UPD_FUNCTION
A message is invalid because the message
type is not known.
44
GE_STAT_CD_UPD_NO_START
A message is invalid because it begins with
the wrong codes.
45
GE_STAT_CD_UPD_PROTO
A message is invalid because it is
unexpected in its current context or some
other reason.
46
GE_STAT_CLIENT_SENDS_FRAG
Counts the number of read/write message
fragments sent by the Client.
47
GE_STAT_CD_UPD_IC_TIMEOUT
Counts
the number of times that an IC
timeout error occurred at the DLL layer
48
GE_STAT_CD_UPD_MSG_IGNORED
Counts the number of times a message
was ignored. A message will be printed to
the error log with the reason.
49
GE_STAT_CD_UPD_NAK
Counts the number of times that the slave
received a short nak from the Client
50
GE_STAT_CD_UPD_STREAMING
Counts the number of times the DLL layer's
buffer was too full to process additional
incoming data.