Filter
Top Products
OneTouch Series II
Users Manual
2-4
Table 2-1. Device Icons
Icon Meaning Operations
Network
Assistant
Press to display the MAC address and software/hardware versions for your instrument.
Station Filter Press to filter out station types of low or no interest to you (Figure 2-2). You can unselect the
following: MAC Only (no L3 Address), IP Address, IPX, DECNET, and APPLETALK
Stations Press to display a list of stations on the network (Figure 2-3). Stations are listed by name by
default. You can also sort other ways (Frame Count, Protocol, Device Type, and MAC
address) by pressing
(Station List Sort). For more details, see "Tracking Addresses" and
"Local versus Remote Stations" in Chapter 3. Press a line in the station list to see a Station
Detail display (Figure 2-6). For more information, read "Station Detail Display."
NetWare Press to display a list of NetWare servers (Figure 2-5). Read “NetWare Devices List” for
more information. If there are more devices than will fit on the display, you can scroll through
the list.
NetBIOS Press to display a scrollable list of all NetBIOS servers with their network addresses and
protocols detected on the segment (Figure 2-4).