Filter
Top Products
6
2. Main Menu Screen 6-15
POD Operations
2. Card Menu Screen
When the [Card Menu] switch on the Main Menu screen is pressed, the following “Card Menu” screen
appears.
This screen is used to transfer screen data between the UG230 and a CF card or a memory card.
1. [Card Recorder Menu] switch
Press this switch when connecting the card recorder to the MJ port of the UG230 and transferring
screen data between the UG230 and a memory card.
2. [Screen Data] switch
Press this switch when transferring screen data between the UG230 and a CF card.
3. [SRAM] switch
Press this switch when saving backup copies of the SRAM memory or when uploading the backup
data from the CF card to the UG230.
4. [Built-in Socket] switch
The CF card insertion position can be selected. If using a CF card while the option unit is
mounted, press this switch.
5. [USB Port] switch
The CF card insertion position can be selected. If using a CF card while a CF card reader/writer
(commercially available) is connected to the USB-A (master port), press this switch.
The Main Menu screen is displayed again.
1.
2.
3.
4.
5.