Filter
Top Products
6-22 2. Main Menu Screen
When [Display --> Card] is Selected:
1. When [Display --> Card] is selected, the “Card Transfer” screen is displayed.
2. Check the folder name and CF card file information, and press the [Start] switch.
* When the access folder name of screen data is the same as that in the CF card, the CF card
file information is indicated on the screen, and data in the unit overwrites the CF card data.
Note that the CF card data is lost when data in the unit overwrites.
When the CF card file information is blank, a new file “DSP0000.BIN” is created in the DSP
folder.
3. During data transfer, the [Start] switch changes into [Busy] and flashes. When data has been
transferred successfully, the following window is displayed.
Press the [OK] switch. The CF card file information shows data that has been transferred.
If any other message is displayed, refer to page 6-26.
4. Press the [Return] switch. The “Card Menu” screen is displayed again.
Indicates the information of the currently selected folder.
If there is no screen data, this field becomes blank.
Flashes during communication with the CF card.
Moves back to the previous
screen.
Indicates the free space
in the CF card.
Indicates the name of the
currently selected folder.
Starts transferring data
[Display --> Card].