Filter
Top Products
13
Do not attempt the procedures described in the following section
unless you are a qualified service technician.
1.6.3 POST-INSTALLATION INSTRUCTIONS
Observe the following after installing a system component:
1. See to it that the components are installed according to the step-by-step
instructions in their respective sections.
2. Make sure you have set all the required jumpers. See Section 1.6 for the
correct jumper settings.
3. Replace any expansion boards or peripherals that you removed earlier.
4. Replace the system cover.
5. Connect the necessary cables and turn on the system.
She_Chp1_12-17 19/1/00, 16:2813