27
Message Cause Workaround
-role
master: Communicate as Master.
slave: Communicate as Slave.
Illegal value for
[ParameterName].
Error found in the parameter of
definition file (fjgi.conf).
Check whether the definition file is
correct.
fail to FragCount Abnormalities were found in message
fragmentation.
Multiple fragments in
descriptor area
Abnormalities were found in message
fragmentation.
bind to 802.2 failed Using protocol was different.
Please try re-activation of interface. If
this is not a cause, report that to your
authorized dealer.
pci_config_setup_failed PCI configuration space couldn't be
obtained.
Installed physical memory may be
insufficient or hardware is failed. If
memory insufficient is not a cause,
report that to your authorized dealer.
soft state alloc failed. Driver internal resources cannot be
obtained.
Allocation of descriptor
memory failed
Driver internal resources on DMA
couldn't be allocated.
fail to
ddi_dma_bind_handle
DMA resources couldn't be allocated.
Could not allocate DMA
handle
Could not bind descriptor
memory
DMA resources couldn't be allocated.
fjgiallocthings failed !! DMA resources couldn't be allocated.
Unable to map adapter
registers.
Mapping of register went wrong.
ddi_get_iblock_cookie-E
RROR
Interrupt resources couldn't be
allocated.
Unable to install interrupt
routine.
Unable to install interrupt routine.
Interrupt resources couldn't be
allocated.
ddi_create_minor_node
failed
Creation of a device file went wrong.
ATTACH failed
OPEN failed: ENOMEM
Driver resources couldn't be allocated.
CLOSE: stream==NULL Driver resources couldn't be freed.
fjgi_param_register error The ndd parameter couldn't be
allocated.
fjgi_board_alloc_mem
failed !!
Driver resources couldn't be allocated.
Error filling TX ring Transmit resources couldn't be
allocated.
status block can't alloced !! Status information resources couldn't
be allocated.
status block can't alloced
handle!
Status information resources couldn't
be allocated.
status block can't bind
handle!
Status information resources couldn't
be allocated.
Installed physical memory may be
insufficient. If this is not a cause,
report them to your authorized dealer.