Filter
Top Products
33
Limitations and known bugs No
Recommended actions
Remarks
Solaris Live Upgrade is not supported with RAID-1(mirror)
Custom Jumpstart installation for mirror volumes using a profile that has filesys keyword
of both original and target disk, will fail and the following error message will be shown
at first boot after the installation.
metattach: host-name: dx: can't attach labeled submirror to an unlabeled mirror
12
Create a one-way mirror in the profile file. Define a primary submirror Disk as filesys
keyword. Then attach additional submirrors with the finish script to create a two-way
mirror.
z Do not include cylinder 0 of the disks in meta devices.
z The disks which constitute a two-way mirror should have the same specification
and configuration. Examples of a profile file and a finish script are shown as
follows:
1) profile file
# profile keywords profile values
# ---------------- -----------------
: :
filesys c0t1d0s4 0:1 unnamed
filesys mirror:d100 c0t1d0s0 200 /
metadb c0t1d0s3 size 8192 count 2
2) finish script
#!/bin/sh
:
prtvtoc /dev/rdsk/c0t1d0s2 > /a/c0t1d0.vtoc
fmthard -s /a/c0t1d0.vtoc /dev/rdsk/c0t0d0s2
metadb -a -c 2 c0t0d0s3
metainit d102 1 1 c0t0d0s0
metattach d100 d102
:
in.routed might generate a core dump under the following conditions.
1) No entry of localhost name in /etc/hosts and
2) No /etc/defaultrouter file and
3) Reboot system
13
Install the following patch.
z 119712-03 or later SunOS 5.10: usr/sbin/in.routed Patch
14 Package remove using pkgrm(1M) might fail if the package provides SMF services and
the package has been removed and installed repeatedly.
## Removing pathnames in class <manifest>
svc:/system/fjsvmadm-evhandsd:default remains enabled; aborting
pkgrm: ERROR: class action script did not complete successfully