Filter
Top Products
31
4 Push the board up to its slot in the direction of the arrow as far as the stop.
5 Press the board into the slot so that it engages.
6 Fold up the retaining bracket again so that it engages.
7 If necessary, connect the cables.
8 Reinstall the board bracket in reverse order as described above.
9 Close the casing (see "Closing the casing").
If you have installed or removed a PCI board, check the relevant PCI slot settings in the BIOS
Setup. If necessary, change the settings. Further information is provided in the PCI board
documentation.
The upper slot is suitable for low-profile cards with an adapter.
CHAPTER 4(25-36) 6/5/03, 7:58 PM31