Filter
Top Products
36
Removing the graphics card
1 Open the casing (see "Opening the casing" chapter).
2 Remove the board bracket as described in "Removing board bracket" section.
3 Press sideways against the retaining bracket and fold it up in the direction of the
arrow (1).
4 Press against the ledge of the slot (2) to release the graphics card from the slot.
5 Pull the graphics card out of the slot in the direction of the arrow (3).
6 Push the slot cover into the slot in the direction of the arrow (1). Make sure that the tip
of the slot cover engages in the notch in the casing bottom.
7 Fold the retaining bracket down again in the direction of the arrow (2). Ensure that the
retaining bracket engages.
8 Install the board bracket as described in "Installing board bracket" section.
9 Close the casing (see "Closing the casing" chapter).
CHAPTER 4(25-36) 6/5/03, 7:59 PM36