Filter
Top Products
41
2 Fold up the drive cage (see "Folding up and down the drive cage" chapter).
3 Fasten the floppy disk drive with the screws (1).
4 Fold down the drive cage (see "Folding up and down the drive cage" chapter).
5 Connect the cables.
6 Close the casing (see "Closing the casing" chapter).
It may be necessary to modify the entry for the drive in the BIOS Setup.
■ Replacing a Hard Disk Drive
Open the casing (see "Opening the casing" chapter).
Fold up the drive cage (see "Folding up and down the drive cage" chapter).
Removing the hard disk drive
1 Disconnect all cables connected to the drive (data cable, power supply cable).
1
CHAPTER 4(37-44) 6/5/03, 7:59 PM41