Filter
Top Products
38
Installing a drive
1 Take the new drive out of its packaging.
2 Adjust the required settings on the drive (if necessary, on already-installed drives as
well).
3 Press the EasyChange rails into the provided holes.
4 Push the accessible drive into the casing (1) until the EasyChange rails engage.
5 Plug the data and the power supply connectors into the drive. Make sure the polarity
is correct.
It may be necessary to modify the entry for the drive in the BIOS Setup.
6 Close the casing (see “Closing the casing” chapter).
CHAPTER 4(37-44) 6/5/03, 7:59 PM38