Filter
Top Products
3
Chapter 2
INSTALLATION OF THE SCANNER
2.1 Installing the Scanner
1. Place the scanner at its installation site.
For details on the scanner's dimensions and
required installation space, refer to "fi4220C
Operator’s Guide" "7.2 Installation Specifica-
tions" in the Setup CD-ROM.
2. Unlock the Shipping lock.
The carrier unit inside the scanner is fixed in
place by the shipping lock to prevent the scanner
from becoming damaged during transportation
from the factory.
After transporting and placing the scanner, tilt the
scanner (approx. 30 degrees) and release the
Shipping lock.
3. Attach the ADF paper chute.
Hold the ADF paper chute and insert its tabs into
the corresponding slots in the scanner as shown in
the figure below.
The Side guides of the ADF paper chute have to
face up.
4. Connect the AC adapter.
1) Connect the AC cable to the AC adapter.
2) Connect the AC adapter connector to the scan-
ner’s DC inlet.
3) Plug the AC cable into the outlet.
Approx.30
degrees
Lock Release
ATTENTION
Use only the AC adapter provided by
the manufacturer.
HINT
The Function Number Display and the
LED may flash for an instant when
plugging the AC cable into the scanner.
ADF paper chute
Tab
Side guide