Filter
Top Products
9
7. Documents are scanned, and the scanned
images are displayed on the [ScandAll 21] win-
dow.
If the scanning completes without any trouble, the
installation performed successfully.
For details on various types of scanning, refer to the "fi-
4220C2 Operator’s Guide" on the Setup CD-ROM.
For FUJITSU ISIS Scanner Driver
■
Preparation
Confirm the following items before installing the driver
application.
• Remove the Setup CD-ROM from its package,
but do not insert the Setup CD-ROM into the CD
driver yet.
• Confirm that the scanner is correctly connected
to your PC.
■
Installing the FUJITSU ISIS Scanner
Driver
1. Press the power button to turn ON the scanner.
2. Turn your PC on and log on to Windows.
3. If the scanner is automatically detected,
[Found New Hardware Wizard] or [Add/
Remove Hardware Wizard] dialog box will
appear. Click [Cancel] to close the Wizard win-
dow.
4. Insert the "Setup CD-ROM" into the CD drive.
⇒ <SETUP DISK START UP SCREEN> appears.
HINT
For details on how to connect the scan-
ner, refer to "2.2 Connecting the Scan-
ner to Your PC" on page 4.
HINT
Windows XP screenshots are used in
this section as examples. The windows
and operations may vary slightly
depending on your OS.
ATTENTION
When using Windows NT 4.0, Win-
dows 2000 or Windows XP, log on as
a user with "Administrator" privileges
(privileges of the administrator of your
PC).
HINT
The windows and operations may vary
slightly depending on your OS.
ATTENTION
This screen may not appear when the
"Autoplay" setting of your PC is OFF.
In this case, run "Install.exe" in this
CD-ROM directly from the "Explorer"
or "My Computer".