Filter
Top Products
fi-4220C2 Image Scanner Getting Started 4
2.2 Connecting the Scanner to
Your PC
When running Windows 95 or Windows NT 4.0, con-
nect the SCSI interface cable. When running Windows
98, Windows Me, Windows 2000, or Windows XP, con-
nect either the USB interface cable or the SCSI interface
cable.
■
Connecting the USB Interface Cable
1. Connect the USB interface cable to the USB
interface connector.
2. Connect the other end of the USB interface
cable to the PC.
■
Connecting the SCSI Interface Cable
When using the scanner with SCSI interface, a commer-
cially available SCSI interface cable and SCSI card must
be purchased.
• SCSI interface cable:
Use a connector which complies with Ultra
SCSI. A 50 Pin Contact Shielded High-Density
SCSI Device Connector is used.
• SCSI card:
Find the recommended SCSI card information in
the Fujitsu web site (FAQ).
http://imagescanner.fujitsu.com/
1. Insert the SCSI interface cable into the inter-
face connector until both sides click.
2. Connect the other end of the cable to the per-
sonal computer.
ATTENTION
Connect only one of the USB or SCSI
interface cables. Windows 95 and
Windows NT 4.0 do not support USB
interface.
ATTENTION
• Be sure to use the USB cable which
comes as an accessory with this
scanner.
Correct operation with commercially
available cables is not guaranteed.
• When connecting to an USB hub,
use the first stage USB hub that is
closest to the computer. If you use
the second or later hub stages, the
scanner may not operate correctly.
• This scanner is provided with two
interfaces: Ultra SCSI and USB 1.1.
On this scanner, each of the SCSI
and USB interface is controlled not
to be used simultaneously. Scanner
can be only connected to either USB
or SCSI interface.
ATTENTION
• When connecting the SCSI interface
cable, turn the scanner off. Be sure
to first connect the SCSI interface
cable and, then turn on the power of
the scanner and the personal com-
puter.
• In a SCSI daisy chain formation,
connect the scanner so that it is the
terminated device.
ATTENTION
Be careful not to bend the pins of the
SCSI cable when connecting to the
scanner .