Fujitsu FI-5530C2 Scanner User Manual


 
AP-5
Appendix3 REPLACING CONSUMABLES
Consumables and Replacement
Cycle
The followings are the specifications of consumables
and their recommended replacement cycles.
To purchase consumables,
contact the store where you
purchased the scanner or an authorized FUJITSU scanner
service provider.
The replacement cycles above are rough guidelines
when using A4/Letter woodfree or wood containing
paper 64 g/m
2
(17 lb). This cycle varies according to the
type of the used paper and how frequently the scanner is
used and cleaned.
The following illustrations show the locations of the
consumables. For details, refer to chapter 4 "Replacing
Consumables" of "fi-5530C2 Operator’s Guide" on the
Setup CD-ROM.
Replacing the Pad ASSY
Replacing the Pick Roller
During its operation, the inside
glass of the ADF becomes very
hot .
Before replacing the
consumables, turn its power off
and unplug the AC adapter from
the outlet. Wait at least
15 minutes.
Description Parts No.
Standard
Replacement Cycle
Pad ASSY PA03334-
0002
After 100,000 scans or
one year
Pick roller PA03334-
0001
After 200,000 sheets
or one year
ATTENTION
Use only the specified consumables.
To remove
To attach
Pad ASSY
Sheet guide
Pick rolle
r