Filter
Top Products
12-02-2003
Page 6-39 of - 6-39 -
51
Pin 1 2 3 4 5
Function GND Vcoil,
Max 24V
Coil,
max 1A
Anode Cathode
Using output as cash drawer solenoid time must be set. By default
solenoid time is 0,5 sec.
Using output for winding motor, connector must be applied.
Upon feeding with motor the winding motor also turns. Please see
manual for winding motor for more information
6.1.10 Serial connector
Connector type CN12; IDH10S1GN (Taitek)
Mating connector part number: FC10AGN (Taitek)
Pin Function Pin Function
1 NC 2 DSR
3 TX 4 CTS
5 RX 6 RTS
7 DTR 8 NC
9 GND 10 NC