Filter
Top Products
12-02-2003
Page 7-45 of - 7-45 -
51
7.3 APS compatible command set (optional)
7.3.1 Escape sequences, overview.
GS / n Set printing speed / Maximum peak current
GS D n Set print Intensity
ESC v Send printer status
ESC I Send printer identity
ESC @ Resets printer
ESC S Puts the printer in sleep mode
GS B n Serial Communication setting
GS b n Set parallel port Busy line hold time
ESC % n Select internal Character Set
ESC R n Select international character Set
ESC 3 n Set line spacing
ESC SP n Set character spacing
ESC ! n Set print mode
ESC { n Set/reset Rotated character
LF Line feed
CR Carriage return
ESC J n Feed paper (n dot lines) forward
ESC j n Feed paper (n dot lines) backward
CAN Cancel print data buffer (text mode)
ESC * n1 n2 n3 n4 n5 n6, data
Print graphics
ESC $ n1,n2 Horizontal dot positioning
ESC V n1,n2,n3 data Horizontal bit image
ESC m Partial cut
ESC i Full cut
GS k n [Start] <data> NUL Print bar code
GS h n Barcode Height
GS w n Barcode magnification
GS H n Text position in Barcode
GS L n Set Mark length
GS T n Se Set TOF position
GS E TOF feed paper
GS X n1 n2 Set Mark to Cut Position
GS x n1 n2 Set Cut Line to Head Dot line Length
GS / n