Filter
Top Products
Installation Procedure 27
2
3. Fix the four rack mounting brackets to the XG1200.
Each of the four rack mounting brackets (left, right, back-left, back-right) has three holes that
should line up with matching holes on the sides of the XG1200, as shown in the diagram.
Attach each rack mounting bracket using the countersunk bracket screws provided.
4. Slide the XG1200 into the rack and fasten it in place.
Insert the XG1200 into the rack and line up the back rack mounting brackets with the already
attached rails. Do not let go of the XG1200 until the rack screws (large) have been fastened
to the previously installed rack/cage nuts. The rack screws (small) may then be used to fas-
ten the back rack mounting brackets to the rails.
Securely tighten all the screws with a screwdriver.
Bracket
Screws
Bracket
Screw
Bracket
Screws
Bracket
Screws
Bracket
Screw
Bracket
Screws
Rack Mounting Bracket BL
Rack Mounting Bracket BR
Rack Mounting Bracket R
Rack Mounting Bracket L
Rack Screws (Large)
Rack Screws (Large)
Rack Screws (Small)
Rack Screws (Small)