Filter
Top Products
30 Installation and Operation
After connecting the peripheral units, connect the XG1200 power cords.
WARNING
• Never touch a power plug with wet hands, as there is a risk of electric shock.
• Do not damage or remodel a power cord, as this may cause electric shock or fire.
Placing a heavy object on, pulling, excessively bending, twisting, or overheating a
power cord can damage it, and may cause electric shock or fire.
• Do not use the XG1200 with a damaged power cord, a damaged power plug, and/
or a loose socket.
Continued use under these conditions may cause a fire.
• If the power plug pins or socket holes are dusty, clean with a dry cloth. Continued
use with a dirty power plug or socket may cause electric shock or fire.
1. Connect the power cords to the XG1200.
Insert the plug at the end of the power cord into the power inlet at the rear of the XG1200.
2-3-2 Connecting the power cords