Filter
Top Products
For Safe Use of the XG1200 5
Never attempt to dismantle or modify the XG1200 yourself. This is extremely dangerous
since the XG1200 includes both high voltage and high temperature components.
If maintenance is required, contact the vendor's service department.
The following warning label may be found on the rear of XG1200. Do not attempt to remove
this warning label. If you cannot read the details written in the warning label because of dirt or
wear, contact the vendor's service department for a replacement label.
• The expected life of the XG1200 is approximately five years, assuming use at an ambient
temperature of 25°C.
• Use of this hardware guide, the XG1200, its firmware, and the management software are
the responsibility of the user.
•
Fujitsu and its partners accept no responsibility for any errors or data loss arising from use
of the XG1200. Before using the XG1200, it should be understood that the XG1200 is not
guaranteed against failure for any more than the original purchase price.
• Fujitsu and its partners do not approve of any use of the firmware provided with the
XG1200, or of any authorized firmware upgrades, for any purpose other than installation
on the XG1200. Modification and disassemble are expressing not permitted.
• When connecting up the fiber optic cables, check that there is no dust, foreign objects or
fingerprints on the connector surfaces.
A default login password is set before the XG1200 is shipped.
For security reasons, a new password should be chosen before the XG1200 is used.
No self maintenance
Warning label
Safety precautions
For security