Filter
Top Products
4 For Safe Use of the XG1200
This symbol indicates the possibility of minor or moderate personal injury, as
well as damage to the XG1200 and/or to other users and their property, if the
XG1200 is not used properly.
Category Caution
Danger of device
damage
Do not place the XG1200 on its side or stack up multiple XG1200s. Doing so may damage the XG1200.
Do not install the XG1200 in an unstable place (such as on a slanted surface or a place subjected to
vibrations). Doing so may damage the XG1200.
Do not place any objects or perform any work on the XG1200. Doing so may damage the XG1200.
Install the XG1200 inside a building. Using the XG1200 outside may damage it.
Do not use the XG1200 in areas of extremely high temperature, low temperature, or a area where the
temperature goes up and down suddenly. Installing the XG1200 in such areas may damage it.
Do not expose the XG1200 to seawater. Installing the XG1200 in such areas may damage it.
Do not use the XG1200 in a place subjected to shock or vibrations. Using the XG1200 in such a place
may damage it.
Do not use the XG1200 in a place where chemicals are being sprayed or may otherwise come in contact
with it. Using the XG1200 in such a place may damage it.
Do not use the XG1200 near objects which generate strong magnetic fields, such as microwave ovens.
Using the XG1200 in such place may damage it.
Do not use the XG1200 with foreign objects (liquids and/or pieces of metal) inside it. Using the XG1200
in such a condition may damage it.
When moving the XG1200, be sure to remove the power plug from the outlet first. Not doing so may
damage it.
Danger of
electromagnetic
interference
Do not use the XG1200 near a radio or a TV.
Doing so can interfere with the radio and TV reception.
Danger of
electric shock
To avoid an electric shock, do not open the cover unless you are a maintenance engineer.
When performing maintenance on the XG1200, be sure to remove the power plug from the outlet first.
Danger when
rackmounting
Only use the XG1200 if the temperature inside the rack is 40°C or less. Ignoring this may damage the
XG1200 (page 24).
Ensure that the rack is sufficiently ventilated and that excess heat is properly exhausted (page 24).
Check that the configuration of devices in the rack does not overload the power supply (page 24).
To ensure the stability of the rack, fix it to the wall or floor as appropriate (page 24).
Do not install the XG1200 in a rack if it would make it unstable (page 24).
Check that all units installed in the rack are correctly connected to a grounded power source (page 24).
When removing the XG1200 from a rack, and be sure to hold it by both sides.
At least two people should work together. (page 25) (page 28)
Danger when
cleaning
When cleaning the XG1200, only use a soft cloth, and wipe it gently.
CAUTION