Fujitsu M3097G+ Scanner User Manual


 
3–4
(M3097G+)
Connect the interface cables to the interface connectors and fasten the cables
with the catches. Connect the other ends of the cables to the host system. If the
image scanner is at the terminal side, connect the terminator.
Catches
Interface cables
To the
host
system
Catches
Terminator
Back of the image scanner
NOTICE
Use shielded interface cables to prevent harmful interferance or
avoid receiving interferance that may cause undesired operation.
If the image scanner is at
the terminal side, connect
the terminator to the
connector to which an
interface cable is not
connected.