Fujitsu M3097G+ Scanner User Manual


 
5–1
5.1 Removing Jammed Documents
5.2 Notes on Daily Use
5.3 Cleaning
5.4 Replacing the Lamp Unit
5.5 SCSI Address Setting (M3097G+)
5.6 Replacing the Pad
5.7 Document counter display and reset
CHAPTER 5 MAINTENANCE
This section explains how to remove jammed documents, and provides notes on daily use and
cleaning.
If "Please clean-up!!" is displayed on the operator panel during the read operation, clean the
mirror as explained in Section 5.3.4.
If "Please clean Pick-roller" is displayed, clean the pick roller as explained in Section 5.3.2.
5.1 Removing Jammed Documents
If documents jam while being fed by the ADF, remove the jammed
documents as follows:
1
Remove the documents from the ADF paper chute.
2
Pulling up the ADF lever, open the automatic document feeder.
3
Remove the jammed documents.
4
Close the ADF to the ADF lever.
Figure 5.1 Removing jammed documents
ADF lever
Automatic document feeder (ADF)