Fujitsu M3097G+ Scanner User Manual


 
5–9
5.5 SCSI Address Setting (M3097G+)
Press the power switch while pressing the mode 1 button. The liquid
crystal display unit displays the following screen.
ISCSLDEpmanahcxegI
Blinking
Press the mode 2 button to shift the blinking position. To set a device
address, press the mode 1 button while “SCSI ID” is blinking.
ISCSDI0
The liquid crystal display screen displays this screen. A value from 0
to 7 is displayed in turn each time the mode 1 button is pressed. Press
the mode 2 button to store the value when an appropriate value is
displayed.
Confirm that the following screen is displayed, and turn off the power.
ewoPffOr!!