Fujitsu M3097G+ Scanner User Manual


 
4–6
2 Pull up the ADF paper chute as follows:
Hold the document cover with one hand and pull up the ADF
paper chute with the other hand to unlock the ADF paper chute.
ADF paper chute
Document cover
3 Fan the documents as follows:
Take a 15 to 20 mm thickness of documents. Lightly hold both
ends with both hands. Bend the documents into an arch as
shown below.
Then hold the documents tightly with both hands, and
straighten the documents. The center of documents swell and
air is introduced between the documents.
Repeat this operation two or three times.
Turn the documents 90°, and repeat the operation again.
15 to 20 mm
Figure 4.3 ADF paper chute setting