Chapter 2 Preparing to Install the Server 2-9
2.3 Tools and Equipment
The following sections list the tools that are required to install the servers.
The following tools are required to install the servers:
■ Screwdriver, Phillips No. 2
■ Antistatic wrist strap
■ Antistatic mat
■ Ethernet cable of category 5 or higher
■ Console (one of the following)
■ ASCII terminal
■ Workstation
■ Terminal server (or patch panel connected to a terminal server)
■ Personal computer
■ XSCF Unit configuration information (IP Address, subnet mask, default gateway,
and so on.)
■ Domain configuration information (IP Address, subnet mask, default gateway, and
so on.)