Filter
Top Products
TROUBLESHOOTING
4-13
NOTES
• Remove paper clips and staples. Flatten the staple holes.
• Read the following types of documents using the Flatbed:
- Paper with clips or staples.
- Paper with wet ink.
- Paper of uneven thickness (for example, envelopes).
- Paper with large rumples or curls.
- Paper with folds or tears.
- Tracing paper.
- Coated paper.
- Carbon paper.
- Paper smaller than A6 size or wider than A3.
- Materials other than paper (for example, cloth, sheet metal, or OHP film).
- Photographic paper.
- Paper with perforations on its sides.
- Non-rectangular paper.
- Very thin paper.
• The leading edge of all documents fed by the ADF should be straightened so the curl of the
paper meets the specifications below:
• Do not mix documents of different widths.
Read surface
Less than
5mm
More than 30mm
Top of the paper
Feed direction
Less than
3mm
More than 30mm
Feed direction
Top of the paper Read surface