Filter
Top Products
C156-E142-02EN 4 - 31
Otherwise, the command ends normally. If a hardware error by which the command cannot be
executed occurs, as is the case with other commands, the command ends with Aborted Command.
Table 4.28 Error register
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
0 WRT_PT MC 0 MCR 0 NOMED 0
WRT_PT: Set to 1 when write-protected.
MC: Set to 1 when media is exchanged. Reported only once.
MCR: Set to 1 when the Eject switch is pressed. Reported only once.
NOMED: Set to 1 when no media is inserted.
4.5.7 IDLE IMMEDIATE (X'95'/X'E1')
Table 4.29 IDLE IMMEDIATE command
Bit
76543210
CM10010101
11100001
DHXXXDRVXXXX
CHXXXXXXXX
CLXXXXXXXX
SNXXXXXXXX
SCXXXXXXXX
FRXXXXXXXX
The ODD sets the power mode to idle mode.