Filter
Top Products
2-10
Using the Point 1600 Pen Tablet
Ensuring Pen Accuracy 2
The Point 1600 pen tablet comes from the factory already calibrated so that the cursor
location matches the pen tip location. If the cursor is not displayed directly under the
pen tip when you touch the screen, then you should calibrate the pen tablet. For more
information, see “Calibrating the Pen” on page 3-4.
Using Hotpads 2
The hotpads are controls along the lower edge of the Point 1600 screen that let you use
functions and make adjustments to the system. You use the hotpads by tapping them
with the pen. The following figure shows the name of each hotpad. Table 2-2 shows
the function performed when you tap each hotpad.
Table 2-2 Hotpads
Speaker
Volume
Tap this hotpad to change the speaker volume to
the low, medium, high, or off setting. (Note that the
sound level may also be controlled by settings in
your application or operating system software.)
Display Select Tap this hotpad to select an external monitor, the
pen tablet display screen, or both as the active
display.
Right Mouse
button
Tap this hotpad once to perform a right mouse
button click with your next pen tap.
Contrast Down
Contrast Up
Tap these hotpads (or press and hold with the pen
tip) to adjust the display screen contrast up or
down.
Brightness Tap this hotpad to change the display brightness
setting. The brightness can be set to one of 2
levels (high or low).
Speaker Volume
Display Select
Right Mouse Button
Contrast Down Contrast Up
Brightness