Filter
Top Products
Features and Controls
1-3
Features and Controls 1
The main features and controls that you use to operate the Point 1600 pen tablet are
described briefly below. Use of these features and controls is described in detail later
in this manual. (Features called out in Figure 1-1 and Figure 1-2 which are not listed
here are also described later in this manual.)
• Suspend/Resume Button
Allows you to suspend or resume system operation or turn the pen tablet on or off
depending on how your system is configured.
• Status LEDs
Indicate system power state, battery state, and hard disk drive access.
• Pen and Pen Holder
The pen is the main input device that you use to enter data and run programs. The
pen should be stored in the pen holder while not in use.
• Hotpads
Tap on the hotpads to adjust speaker volume, display contrast and brightness, to
perform a right-mouse-button click, or select the display device.
• DC Power Input
Allows you to attach an external power source to power the pen tablet and charge
the battery pack.
• Keyboard/Mouse Port
Allows you to connect the Fujitsu keyboard or a PS/2-style mouse. (Most
PS/2-style keyboards can be connected successfully.)
• Optional Wireless LAN Adapter or Built-In Modem
Your system may be equipped with an optional wireless LAN adapter, in which
case the antenna (shown) may be present, or an optional built-in modem, in which
case an RJ-11 jack (not shown) is present in this location.
• Battery Pack
The battery pack on the Point 1600 pen tablet can be charged in the pen tablet or
can be removed from the pen tablet and charged in an external battery charger
(sold separately).
• Hard Disk Drive
The Point 1600 pen tablet is equipped with a built-in hard disk drive.