Filter
Top Products
TX120 Operating Manual 41
Hardware installation Connecting the server to the mains
4.4 Connecting the server to the mains
The server is fitted with a built-in power supply.
V CAUTION!
The server is automatically set to a mains voltage in the range 100 V -
127 V or 200 V - 240 V. You may only operate the server if its rated
voltage range corresponds to the local mains voltage.
Figure 7: Connecting the server to the mains
Ê Connect the power cord to the server power supply (1).
Ê Insert the mains plug into an earthing contact socket (2) in the internal
supply network.
Ê Secure the power cord in the terminal so the insulated connector cannot be
disconnected from the server accidentally (3).
3
2
1